Typical job description for chief engineer of RES. Functions of the chief engineer at the enterprise

The job description of the chief engineer regulates working relationships. The document contains general provisions about the position, requirements for work experience, knowledge, education, the order of subordination, occupation and dismissal of the employee from the position, a list of his functional duties, rights, and types of responsibilities.

The instructions are developed by the head of the organization’s department. Approved by the General Director.

The standard form provided below can be used when drawing up a job description for the chief engineer of a construction organization, manufacturing enterprise, project engineer, etc. A number of provisions of the document may differ depending on the specifics of the organization’s activities.

Sample of a typical job description for a chief engineer

I. General provisions

1. The chief engineer belongs to the “managers” category.

2. The chief engineer reports to the general director.

3. During the absence of the chief engineer, his rights, functional duties, and responsibilities are transferred to another official appointed in the prescribed manner.

4. A person with a higher technical education and at least five years of experience in similar work is appointed to the position of chief engineer.

5. The appointment and dismissal of the chief engineer is carried out by order of the general director.

6. The chief engineer is guided in his activities by:

methodological materials for conducting activities;
Charter of the organization;
this job description;
internal labor regulations of the organization;
orders, instructions from management;
governing and regulatory acts of the organization;
legislative acts of the Russian Federation.

7. The chief engineer must know:

profile, organizational structure of the company;
legislative and regulatory legal acts defining the production, economic, financial and economic activities of the organization;
technologies for production of products and provision of services;
rules for drawing up and approving plans for the economic and production activities of the organization;
legislation of the Russian Federation, regulations, orders, instructions, other regulatory acts of the organization.

II. Job responsibilities of the chief engineer

The chief engineer performs the following job responsibilities:

1. Organizes an increase in production efficiency and labor productivity, reduction of costs, reasonable use of production resources, adherence to state standards of manufactured products.

2. Regulates the policy and direction of the technical development of the organization.

3. Establishes activities to improve the quality, range, and update of the organization’s products.

4. Manages the development of plans and the implementation of their provisions regarding the renewal and modernization of equipment and technologies.

5. Contributes to the timely preparation of technical documentation of the organization.

6. Controls the content of technological, design, engineering discipline, norms, rules for safety, labor protection, industrial sanitation, fire safety.

7. Monitors compliance with the requirements of environmental agencies and technical sanitary inspection bodies.

8. Conducts and organizes advanced training, training of engineering and technical personnel, and contributes to the continuous improvement of employee qualifications.

9. Organizes experiments, scientific research, testing of new technologies, activities in the field of technical, scientific information, rationalization, invention, transfer of advanced production experience.

10. Manages the activities of the organization’s technical services, monitors the results of their activities, the state of production and labor discipline in subordinate departments.

11. Manages the activities of the departments of the chief mechanic, power engineer, and work to ensure the uninterrupted functioning of equipment.

12. Together with the chief economist, prepares measures to reduce the labor intensity of product production by introducing new technological processes and modes of operation of the organization’s equipment.

13. Introduces the use of mechanization and automation of engineering activities.

III. Rights

The chief engineer has the right:

1. Represent the interests of the organization on established issues.

2. Receive information from subordinates, contractors, and related departments about the progress of work.

3. Inform the manager about identified shortcomings in the organization’s work, send proposals for their elimination.

4. Make independent decisions within your competence.

5. Participate in activities to improve your qualifications, knowledge and skills.

6. Demand that management create normal conditions for the execution of their powers and safe work.

7. Not perform your job duties if there is a danger to life or health.

8. Receive information from management about draft decisions regarding your work.

9. Submit proposals to management to improve the organization’s activities.

10. Receive advice from experts on issues that are beyond the competence of the chief engineer.

11. Communicate with departments of the organization on issues of their work.

IV. Responsibility

The chief engineer is responsible for:

1. Causing damage to the organization, its employees, the state, and clients.

2. Violation of the requirements of the organization’s governing documents.

3. Violation of the requirements of internal labor regulations, labor discipline, fire protection standards, and safety regulations.

4. Reliability of information provided to management about the technical condition of equipment.

6. Results of one’s own actions, independent decisions.

7. Improper performance of one’s official duties.

8. Safety and operability of equipment and mechanisms.

9. Untimely sending of equipment for repairs and maintenance.

JOB DESCRIPTION

chief engineer

(approximate form)

1. GENERAL PROVISIONS

1.1. This job description defines the functional duties, rights and responsibilities of the chief engineer of the Organization.

1.2. The chief engineer is appointed to the position and dismissed from the position in the manner established by the current labor legislation by order of the head of the Organization.

1.3. The Chief Engineer reports directly to the head of the Organization.

1.4. A person with a higher professional (technical) education and work experience in his specialty in leadership positions in the relevant sector of the economic sector for at least 5 years is appointed to the position of chief engineer.

1.5. The chief engineer must know:

Legislative and other regulatory legal acts regulating the production, economic and financial-economic activities of the Organization, resolutions of federal, regional and local government authorities and management, defining priority directions for the development of the economy and the relevant industry;

Organizational and administrative documents and regulatory materials of other bodies relating to the activities of the Organization;

Profile, specialization and structural features of the Organization;

Prospects for the technical, economic and social development of the industry and the business plan of the Organization;

Production facilities of the Organization;

Manufacturing technology of the Organization's products;

The procedure for drawing up and approving plans for the production and economic activities of the Organization;

Market methods of managing and managing the Organization;

The procedure for concluding and executing economic and financial contracts;

Scientific and technical achievements in the relevant industry and the experience of leading Organizations;

Economics and organization of production, labor and management;

Fundamentals of environmental legislation;

Fundamentals of labor legislation;

Labor protection rules and regulations.

2. FUNCTIONAL RESPONSIBILITIES

Note. The functional responsibilities of the chief engineer are determined on the basis and scope of the qualification characteristics for the position of chief engineer and can be supplemented and clarified when preparing a job description based on specific circumstances.

Chief Engineer:

2.1. Determines the technical policy and directions of technical development of the Organization in a market economy, ways of reconstruction and technical re-equipment of existing production, the level of specialization and diversification of production for the future.

2.2. Ensures the necessary level of technical preparation of production and its constant growth, increasing production efficiency and labor productivity, reducing costs (material, financial, labor), rational use of production resources, high quality and competitiveness of manufactured products, works or services, compliance of manufactured products with current state standards , technical conditions and technical aesthetic requirements, as well as their reliability and durability.

2.3. In accordance with the approved business plans of the Organization for the medium and long term, he manages the development of measures for the reconstruction and modernization of the Organization, preventing the harmful effects of production on the environment, careful use of natural resources, creating safe working conditions and improving the technical culture of production.

2.4. Organizes the development and implementation of plans for the introduction of new equipment and technology, carrying out organizational and technical activities, research and development work.

2.5. Ensures the effectiveness of design solutions, timely and high-quality preparation of production, technical operation, repair and modernization of equipment, achievement of high quality products in the process of its development and production.

2.6. Based on modern achievements of science and technology, the results of patent research, as well as best practices, taking into account market conditions, organizes work to improve the range and quality, improve and update manufactured products, work (services), equipment and technology, and create fundamentally new competitive types of products , on the design and implementation into production of means of complex mechanization and automation of technological processes, control and testing of high-performance specialized equipment, the development of standards for the labor intensity of products and standards for the consumption of materials for their production, the consistent implementation of savings and cost reduction.

2.7. Monitors compliance with design, engineering and technological discipline, rules and regulations on labor protection, safety, industrial sanitation and fire safety, requirements of environmental, sanitary authorities, as well as bodies exercising technical supervision.

2.8. Ensures timely preparation of technical documentation (drawings, specifications, technical conditions, technological maps).

2.9. Concludes agreements with research, design (engineering and technological) organizations and higher educational institutions for the development of new equipment and production technology, projects for the reconstruction of the Organization, its divisions, renewal and modernization of equipment, comprehensive mechanization and automation of production processes, automated production management systems, exercises control over their development, organizes the review and implementation of technical re-equipment projects developed by third-party organizations, and prepares applications for the purchase of equipment on leasing terms.

2.10. Coordinates work on issues of patent and invention activity, unification, standardization and certification of products, certification and rationalization of jobs, metrological support, mechanical and energy maintenance of production.

2.11. Takes measures to improve the organization of production, labor and management based on the introduction of the latest technical and telecommunication tools for performing engineering and management work.

2.12. Organizes scientific research and experiments, testing of new equipment and technology, as well as work in the field of scientific and technical information, rationalization and invention, dissemination of advanced production experience.

2.13. Carries out work to protect the priority of implemented scientific and technical solutions, prepare materials for their patenting, obtain licenses and intellectual property rights.

2.14. Organizes training and advanced training for workers and engineers and ensures continuous improvement of personnel training.

2.15. Manages the activities of the technical services of the Organization, monitors the results of their work, the state of labor and production discipline in subordinate units.

2.16. He is the first deputy director of the Organization.

3. RIGHTS

The chief engineer has the right:

3.1. Get acquainted with the draft decisions of the head of the organization concerning the activities of the department headed.

3.2. Participate in discussions of issues related to the duties performed by him.

3.3. Submit proposals for improvement of the activities of the department headed for consideration by the head of the organization.

3.4. Interact with the heads of other structural divisions of the organization.

3.5. Sign (endorse) documents within your competence.

3.6. Make proposals to the management of the organization to reward distinguished employees and impose penalties on violators of production and labor discipline.

3.7. Require the head of the organization to provide assistance in the performance of his official duties and rights.

4. RESPONSIBILITY

The chief engineer is responsible for:

4.1. For failure to perform or improper performance of their duties provided for in this job description - in accordance with current labor legislation.

4.2. For offenses committed during the period of its activities - in accordance with the current civil, administrative and criminal legislation of the Russian Federation.

4.3. For causing material damage - in accordance with the current legislation of the Russian Federation.

4.4. For violation of the internal labor regulations, fire safety and safety regulations established in the Organization - in accordance with the current legislation of the Russian Federation.

5. OPERATING MODE

5.1. The working hours of the chief engineer are determined in accordance with the internal labor regulations established in the Organization.

5.2. Due to production needs, the chief engineer may go on business trips (including local ones).

5.3. To resolve operational issues related to ensuring production activities, the chief engineer may be allocated company vehicles.

This job description has been developed in accordance with _________ _________________________________________________________________________. (name, number and date of document)

AGREED BY: Legal Adviser ____________ ___________________ (signature) (Full name)

"___"__________ ___ G.

I have read the instructions: _____________ ___________________ (signature) (full name)

I. General provisions

1. The chief engineer belongs to the category of managers.

2. The chief engineer is the first deputy director of the enterprise and is responsible for the results and efficiency of the enterprise’s production activities.

3. A person with a higher professional (technical) education and work experience in his specialty in management positions in the relevant industry profile of the enterprise for at least 5 years is appointed to the position of chief engineer.

4. Appointment to the position of chief engineer and dismissal from it are made by order of the director of the enterprise.

5. The chief engineer must know:

5.1. Legislative and regulatory legal acts regulating the production, economic and financial-economic activities of the enterprise, resolutions of federal, regional and local government authorities and management, defining priority directions for the development of the economy and the relevant industry.

5.2. Organizational and administrative documents and regulatory materials of other bodies relating to the activities of the enterprise.

5.3. Profile, specialization and features of the enterprise structure.

5.4. Prospects for technical, economic and social development of the industry and business plan of the enterprise.

5.5. Production capacity of the enterprise.

5.6. Technology of production of the enterprise's products.

5.7. The procedure for drawing up and approving plans for the production and economic activities of an enterprise.

5.8. Market methods of business management and enterprise management.

5.9. The procedure for concluding and executing economic and financial contracts.

5.10. Scientific and technical achievements in the relevant industry and the experience of leading enterprises.

5.11. Economics, organization of labor, production and management.

5.12. Fundamentals of environmental legislation.

5.13. Fundamentals of labor legislation.

5.14. Rules and regulations of occupational health, safety, industrial sanitation and fire protection.

II. Job responsibilities

Chief Engineer:

1. Determines the technical policy and directions of technical development of the enterprise in a market economy, ways of reconstruction and technical re-equipment of existing production, the level of specialization and diversification of production for the future.

2. Ensures the necessary level of technical preparation of production and its constant growth, increasing production efficiency and labor productivity, reducing costs (material, financial and labor), rational use of production resources, high quality and competitiveness of manufactured products, works or services, compliance of manufactured products with existing ones state standards, technical conditions and technical aesthetic requirements, as well as their reliability and durability.

3. In accordance with the approved business plans of the enterprise for the long and medium term, manages the development of measures for the reconstruction and modernization of the enterprise, preventing the harmful effects of production on the environment, careful use of natural resources, creating safe working conditions and improving the technical culture of production.

4. Organizes the development and implementation of plans for the introduction of new equipment and technology, carrying out organizational and technical activities, research and development work.

5. Ensures the effectiveness of design solutions, timely and high-quality preparation of production, technical operation, repair and modernization of equipment, achieving high quality products in the process of its development and production.

6. Based on modern achievements of science and technology, the results of patent research, as well as best practices, taking into account market conditions, organizes work to improve the range and quality, improve and update manufactured products, work (services), equipment and technology, create fundamentally new competitive types of products, on the design and implementation of means of complex mechanization and automation of technological processes, control and testing of high-performance specialized equipment, the development of standards for the labor intensity of products and standards for the consumption of materials for their production, the consistent implementation of savings and cost reduction.

7. Monitors compliance with design, engineering and technological discipline, rules and regulations on labor protection, safety precautions, industrial sanitation and fire safety, requirements of environmental, sanitary authorities, as well as bodies exercising technical supervision.

8. Ensures timely preparation of technical documentation (drawings, specifications, technical conditions. Technological maps).

9. Concludes agreements with research, design (engineering and technological) organizations and higher educational institutions for the development of new equipment and production technology, projects for the reconstruction of the enterprise, its divisions, renovation and modernization of equipment, comprehensive mechanization and automation of production processes, automated control systems production, exercises control over their development, organizes the consideration and implementation of technical re-equipment projects developed by third-party organizations, and draws up applications for the purchase of equipment on leasing terms.

10. Coordinates work on issues of patent and invention activity, unification, standardization and certification of products, certification and rationalization of jobs, metrological support, mechanical and energy maintenance of production.

11. Takes measures to improve the organization of production, labor and management based on the introduction of the latest technical and telecommunication means for performing engineering and management work.

12. Organizes scientific research and experiments, testing of new equipment and technology, as well as work in the field of scientific and technical information, rationalization and invention, dissemination of advanced production experience.

13. Works to protect the priority of implemented scientific and technical solutions, prepare materials for their patenting, obtain licenses and intellectual property rights.

14. Organizes training and advanced training for workers and engineers and ensures continuous improvement of personnel training.

15. Manages the activities of the technical services of the enterprise, monitors the results of their work, the state of labor and production discipline in subordinate departments.

16. During the absence of the director of the enterprise, he performs his duties and uses his rights, and is responsible for their proper execution and use.

III. Rights

The chief engineer has the right:

1. Act on behalf of the technical services of the enterprise, represent the interests of the enterprise in relations with other structural divisions of the enterprise, organizations and government bodies.

2. Request and receive the necessary information from the heads of structural divisions of the enterprise and specialists.

3. Check the activities of the structural divisions of the enterprise in the field of technical preparation of production.

4. Participate in the preparation of draft orders, instructions, directions, as well as estimates, contracts and other documents related to the production activities of the enterprise.

5. Interact with the heads of all structural divisions on issues of production activities of the enterprise.

6. Give instructions to the heads of structural divisions of the enterprise on production issues.

7. Within the limits of their competence, sign and endorse documents; issue, with his signature, orders for the enterprise on issues of production activities.

8. Independently conduct correspondence with structural divisions of the enterprise as well as other organizations on issues within its competence.

9. Make proposals to the director of the enterprise on bringing officials to material and disciplinary liability based on the results of inspections.

IV. Responsibility

The chief engineer is responsible for:

1. For improper performance or failure to fulfill one’s job duties provided for in this job description - within the limits determined by the current labor legislation of the Russian Federation.

2. For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of the Russian Federation.

3. For causing material damage - within the limits determined by the current labor and civil legislation of the Russian Federation.

The chief engineer of the plant is classified as a manager at the enterprise. He is the first deputy, that is, second in rank after the director of the organization. He is entrusted with great responsibility, so he supervises the activities of all departments to achieve the most positive result.

General provisions

In order to have the opportunity to be appointed to the position and perform the duties of a chief engineer, a higher education is required that corresponds to the profile of the organization. In a position similar to the enterprise in a related profile, it is necessary to have at least 5 years of work experience, and during these years the person must work in one of the management positions. The director of the enterprise appoints and assigns the duties of the chief engineer to the position, and also issues an order to remove him from it.

What should the chief engineer know?

A complete list and essence of regulatory legal acts that spell out the provisions that define the norms of economic and financial activity of an enterprise operating in a specific area. He must highlight from the entire range of information information relating to the development and choice of direction of economic and production activities in accordance with these regulations. These aspects are assumed in the job description of the chief engineer of the enterprise.

Rules for the preparation and execution of organizational and administrative documents, as well as any regulatory and legal materials directly related to the activities of a particular enterprise.

Information about the core activities of the enterprise, as well as its detailed structure, including all sectors.

Business plan and prospects for the development of the enterprise in all areas, including both the material side and the production aspect.

The exact capabilities of the enterprise at which production operates at its maximum level.

Rules and procedures for coordinating and drawing up plans for economic activities related to the production of all types of products of the enterprise.

Market aspects of business, as well as information on recommendations for managing a company.

The procedure for the formation, approval and conclusion of financial agreements relating to the sale of products.

Existing achievements in the scientific and technical field of production, as well as valuable experience gained from other enterprises.

Features of economics and organizational issues related to working with people who provide the main labor resources. Ability to regulate production processes, as well as perform management functions.

Basic provisions concerning environmental legislation and regulations for maintaining the environment in a satisfactory condition.

Provisions relating to management in the field of labor legislation.

Basic requirements for labor protection standards, compliance with and provision of safety regulations, sanitation in all production premises, as well as fire protection.

Work instructions and responsibilities of the chief engineer

The chief engineer is subordinate to the director of the enterprise. His responsibilities include managing the entire range of technical services of the enterprise. If the chief engineer of the plant is absent for any reason, for example, went on vacation or sick leave, all his duties are carried out by his personal deputy. Sometimes there is no such person at the enterprise. Then the director is obliged to appoint a temporary person in charge. In this case, all responsibilities of the chief engineer, production and the full range of responsibilities are transferred to this person.

Job responsibilities

Determine and coordinate the policy, directions of development of the company in technical terms, as well as make an assessment and adjust the position of the organization in relation to the modern market of similar products. Reconstruction paths are also determined.

The responsibilities of the chief engineer include supervising the preparation of the plan and carrying out all activities related to the technical re-equipment of the enterprise.

There is an assessment and changes in production from the perspective of long-term development. This is determined by the job description of the chief engineer of the enterprise.

Ensure the necessary degree of technical development of production and supervise its power, and, if necessary, improve it, mostly through replacement, repair or improvement of equipment.

Increasing production efficiency and drawing up algorithms for the most effective use of manual and mental labor of employees.

Taking actions aimed at reducing all aspects leading to costs of any kind, including labor, and not just financial.

Actions of the chief engineer

Local use of production and labor resources. Ensuring the highest quality and competitive level of products.

Control over the rational use of production resources.

Creation of proper conditions to ensure high quality of work and services provided.

Compliance of manufactured products with all state standards, technical specifications, aesthetic requirements, as well as control over the reliability and long service life of manufactured goods.

Development of events and celebrations, the purpose of which is to reconstruct and improve all aspects of the development of the enterprise. This is done according to a business plan developed in advance, from which the chief engineer for the operation of the building has no right to deviate.

Development of measures to prevent the negative impact of the enterprise on the environment.

Careful and economical use of resources provided by nature.

Features of the activity

Organization and implementation of plans regarding the production of new technical equipment, as well as exclusive technologies for the company’s activities.

Carrying out organizational activities, the purpose of which is the development and improvement of technical equipment.

Conducting technical events and collecting scientific papers, research conferences among company employees or with the participation of independent consultants.

Additional Responsibilities

Development and implementation of plans for the design and sales of new technical equipment and manufactured goods.

Ensuring a significant positive effect from various research projects.

Prepare production for full work of all employees in a timely manner and with the highest quality.

Repair equipment and take all possible actions to modernize it or eliminate even small imperfections.

Take measures to achieve the highest quality of manufactured goods in the process of their development and implementation.

Core activities

Based on modern achievements of science and technology, including the achievements of housing and communal services, the chief engineer checks and analyzes the results of patent research, and also takes all the information on the best practices of modern researchers or similar companies. The information is used to improve the operation of the enterprise. His areas of activity also include:

Updating and continuous improvement of products, as well as works or services provided by the company.

Development and creation of new varieties of products.

Implementation with preliminary design of complex mechanization, as well as the maximum possible automation of technological processes.

Monitoring the serviceability of equipment.

Development of standards that describe and analyze the labor intensity of various products, production and adherence to the economy regime.

Taking actions aimed at eliminating or partially reducing costs.

Exercising control

The functions of the chief engineer include monitoring compliance with discipline in the design, engineering and technological spheres at the enterprise, as well as assigning and ensuring proper conditions for the implementation of production standards on technology and labor protection, industrial and fire safety.

The chief engineer ensures that proper measures are taken to ensure that the state of production complies with the standards that are checked by various environmental and sanitary authorities, as well as persons exercising technical supervision.

What should this employee be able to do and do?

Ensuring timely preparation of technical documentation.

Concluding contracts for the design and development of new equipment for the organization.

It is necessary to be able to negotiate and make adjustments to documents not only when interacting with design organizations, but also with research institutes.

In addition to creating new equipment, you should order renewal, repair, modernization of old equipment, as well as its comprehensive mechanization.

The chief engineer (including the railway) must exercise control over the development and implementation of all production innovations, as well as oversee automated production process control systems. Before introducing new projects, it is necessary to review them and make decisions regarding the approval or rejection of specific files or ideas.

Manager's responsibilities

Coordination of work on the implementation of patent and invention activities, standardization, as well as the completion of the product certification procedure.

Supervision and verification of certification, as well as preparation of products and reports for this procedure.

Maintenance of production in the areas of drawing up reports and preparing it for visits by regulatory organizations.

The responsibility of the chief engineer imposes on him the duty to act on behalf of the technical services of the enterprise. He requests and receives all the information necessary to carry out his activities from the heads of structural divisions. In order to carry out his duties in full, this employee monitors the activities of the heads of structural divisions, and he especially carefully monitors the technical preparation of the enterprise.

Download job description
chief engineer(.doc, 86KB)

I. General provisions

The chief engineer belongs to the category of managers.
The chief engineer is the first deputy director of the enterprise and is responsible for the results and efficiency of the enterprise's production activities.
A person who has a higher professional (technical) education and work experience in his specialty in managerial positions in the relevant industry profile of the enterprise for at least 5 years is appointed to the position of chief engineer.
Appointment to the position of chief engineer and dismissal from it are made by order of the director of the enterprise.
The chief engineer must know:
1. 5.1. Legislative and regulatory legal acts regulating the production, economic and financial-economic activities of the enterprise, resolutions of federal, regional and local government authorities and management, defining priority directions for the development of the economy and the relevant industry.
2. 5.2. Organizational and administrative documents and regulatory materials of other bodies relating to the activities of the enterprise.
3. 5.3. Profile, specialization and features of the enterprise structure.
4. 5.4. Prospects for technical, economic and social development of the industry and business plan of the enterprise.
5. 5.5. Production capacity of the enterprise.
6. 5.6. Technology of production of the enterprise's products.
7. 5.7. The procedure for drawing up and approving plans for the production and economic activities of an enterprise.
8. 5.8. Market methods of business management and enterprise management.
9. 5.9. The procedure for concluding and executing economic and financial contracts.
10. 5.10. Scientific and technical achievements in the relevant industry and the experience of leading enterprises.
11. 5.11. Economics, organization of labor, production and management.
12. 5.12. Fundamentals of environmental legislation.
13. 5.13. Fundamentals of labor legislation.
14. 5.14. Rules and regulations of occupational health, safety, industrial sanitation and fire protection.
The chief engineer reports directly to the director of the enterprise.
The chief engineer manages the technical services of the enterprise.
During the absence of the chief engineer (vacation, illness, business trip, etc.), his duties are performed by a deputy (in his absence, a person appointed in accordance with the established procedure), who acquires the corresponding rights and is responsible for their proper execution.

II. Job responsibilities

Chief Engineer:

Determines the technical policy and directions of technical development of the enterprise in a market economy, ways of reconstruction and technical re-equipment of existing production, the level of specialization and diversification of production for the future.
Ensures the necessary level of technical preparation of production and its constant growth, increasing production efficiency and labor productivity, reducing costs (material, financial and labor), rational use of production resources, high quality and competitiveness of manufactured products, works or services, compliance of manufactured products with current state standards , technical conditions and technical aesthetic requirements, as well as their reliability and durability.
In accordance with the approved business plans of the enterprise for the long and medium term, he manages the development of measures for the reconstruction and modernization of the enterprise, preventing the harmful effects of production on the environment, careful use of natural resources, creating safe working conditions and improving the technical culture of production.
Organizes the development and implementation of plans for the introduction of new equipment and technology, carrying out organizational and technical activities, research and development work.
Ensures the effectiveness of design solutions, timely and high-quality preparation of production, technical operation, repair and modernization of equipment, achievement of high quality products in the process of its development and production.
Based on modern achievements of science and technology, the results of patent research, as well as best practices, taking into account market conditions, organizes work to improve the range and quality, improve and update manufactured products, work (services), equipment and technology, and create fundamentally new competitive types of products , on the design and implementation into production of means of complex mechanization and automation of technological processes, control and testing of high-performance specialized equipment, the development of standards for the labor intensity of products and standards for the consumption of materials for their production, the consistent implementation of savings and cost reduction.
Monitors compliance with design, engineering and technological discipline, rules and regulations on labor protection, safety precautions, industrial sanitation and fire safety, requirements of environmental, sanitary authorities, as well as bodies exercising technical supervision.
Ensures timely preparation of technical documentation (drawings, specifications, technical conditions. Technological maps).
Concludes agreements with research, design (engineering and technological) organizations and higher educational institutions for the development of new equipment and production technology, projects for the reconstruction of the enterprise, its divisions, renovation and modernization of equipment, comprehensive mechanization and automation of production processes, automated production management systems, exercises control over their development, organizes the consideration and implementation of technical re-equipment projects developed by third-party organizations, and prepares applications for the purchase of equipment on leasing terms.
Coordinates work on issues of patent and invention activity, unification, standardization and certification of products, certification and rationalization of jobs, metrological support, mechanical and energy maintenance of production.
Takes measures to improve the organization of production, labor and management based on the introduction of the latest technical and telecommunication tools for performing engineering and management work.
Organizes scientific research and experiments, testing of new equipment and technology, as well as work in the field of scientific and technical information, rationalization and invention, dissemination of advanced production experience.
Carries out work to protect the priority of implemented scientific and technical solutions, prepare materials for their patenting, obtain licenses and intellectual property rights.
Organizes training and advanced training for workers and engineers and ensures continuous improvement of personnel training.
Manages the activities of the technical services of the enterprise, monitors the results of their work, the state of labor and production discipline in subordinate departments.
During the absence of the director of the enterprise, he performs his duties and uses his rights, and is responsible for their proper execution and use.

III. Rights

The chief engineer has the right:

Act on behalf of the technical services of the enterprise, represent the interests of the enterprise in relations with other structural divisions of the enterprise, organizations and government bodies.
Request and receive necessary information from heads of structural divisions of the enterprise and specialists.
Check the activities of the enterprise’s structural divisions in the field of technical preparation of production.
Participate in the preparation of draft orders, instructions, directions, as well as estimates, contracts and other documents related to the production activities of the enterprise.
Interact with the heads of all structural divisions on issues of production activities of the enterprise.
Give instructions to the heads of structural divisions of the enterprise on production issues.
Within your competence, sign and endorse documents; issue, with his signature, orders for the enterprise on issues of production activities.
Independently conduct correspondence with structural divisions of the enterprise as well as other organizations on issues within its competence.
Make proposals to the director of the enterprise on bringing officials to material and disciplinary liability based on the results of inspections.

IV. Responsibility

The chief engineer is responsible for:

For improper performance or failure to fulfill one’s job duties as provided for in this job description - within the limits determined by the current labor legislation of the Russian Federation.
For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of the Russian Federation.
For causing material damage - within the limits determined by the current labor and civil legislation of the Russian Federation.