We bring to your attention a typical example of a job description for an instrument operator of the 5th category, sample 2019/2020. A person with education or special training and work experience can be appointed to this position. Do not forget, each instruction of a 5th category instrument operator is issued in hand against a signature.

The following provides typical information about the knowledge that a 5th category instrument operator should have. About duties, rights and responsibilities.

This material is part of the huge library of our website, which is updated daily.

1. General Provisions

1. An instrument operator of the 5th category belongs to the category of workers.

2. An instrument operator of the 5th category is accepted for a person who has __________ (education, special training) and ________ years of experience in this position.

3. An instrument operator of the 5th category is hired and dismissed from the position by ___________ (by whom, position)

4. A 5th grade instrument technician must know:

a) special (professional) knowledge for the position:

— design, repair methods, testing and adjustment of maintenance of control and automation devices;

— the main processes of processing oil, gas, and other products used at this enterprise;

— methodology for calculating restriction devices, control valves, replaceable vessels;

- basics of radio.

— qualification requirements for this position of a lower rank.

b) general knowledge of an employee of the organization:

— rules on labor protection, industrial sanitation and fire safety;

— rules for using personal protective equipment;

— requirements for the quality of work (services) performed and for the rational organization of labor in the workplace;

— range and labeling of materials used, consumption rates of fuels and lubricants;

— rules for moving and storing goods;

— types of defects and ways to prevent and eliminate them;

5. In his activities, a 5th category instrument operator is guided by:

- legislation of the Russian Federation,

— Charter (regulations) of the organization,

- this job description,

— Internal labor regulations of the organization.

6. The 5th grade instrument technician reports directly to: ________ (position)

2. Job responsibilities of a 5th category instrument operator

Instrument operator 5th category:

a) Special (professional) job responsibilities:

1. Maintenance and adjustment of automation equipment mounted on serviced installations.

2. Development and implementation of new means of control and automatic regulation. Production in laboratory conditions of analysis to determine the dielectric loss tangent of petroleum products.

3. Monitoring the periodic inspection of devices and their submission to the State Inspection.

4. Drawing up defect sheets for current and major repairs.

5. Acceptance of completed repair work and checking the readiness of devices for startup.

6. Supervising the work of instrument operators of lower qualifications.

7. Job responsibilities for this position of a lower rank(s).

b) General job responsibilities of an employee of the organization:

— Compliance with the internal labor regulations and other local regulations of the organization, internal rules and regulations of labor protection, safety precautions, industrial sanitation and fire protection.

— Fulfillment, within the framework of the employment contract, of the orders of the employees to whom it was repaired in accordance with these instructions.

— Carrying out work on acceptance and delivery of shifts, cleaning and washing, disinfection of serviced equipment and communications, cleaning of the workplace, devices, tools, as well as maintaining them in proper condition.

— Maintaining established technical documentation.

3. Rights of an instrument operator of the 5th category

An instrument technician of the 5th category has the right to:

1. Submit proposals for management’s consideration:

— to improve work related to the responsibilities provided for in this instruction,

- on encouraging distinguished employees subordinate to him,

— on bringing to material and disciplinary liability workers who violated production and labor discipline.

2. Request from structural divisions and employees of the organization the information necessary for him to perform his job duties.

3. Get acquainted with the documents defining his rights and responsibilities for his position, criteria for assessing the quality of performance of official duties.

4. Get acquainted with draft management decisions relating to its activities.

5. Require management to provide assistance, including ensuring organizational and technical conditions and execution of the established documents necessary for the performance of official duties.

6. Other rights established by current labor legislation.

4. Responsibility of the 5th category instrument operator

An instrument technician of the 5th category is responsible in the following cases:

1. For improper performance or failure to fulfill one’s job duties provided for in this job description - within the limits established by the labor legislation of the Russian Federation.

2. For offenses committed in the course of their activities - within the limits established by the current administrative, criminal and civil legislation of the Russian Federation.

3. For causing material damage to the organization - within the limits established by the current legislation of the Russian Federation.

Job description for instrument operator of the 5th category - sample 2019/2020. Job responsibilities of an instrument operator of the 5th category, rights of an instrument operator of the 5th category, responsibility of an instrument operator of the 5th category.

This job description has been automatically translated. Please note that automatic translation is not 100% accurate, so there may be minor translation errors in the text.

Preface to the job description

0.1. The document comes into force from the moment of approval.

0.2. Document developer: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.3. The document has been approved: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.4. Periodic verification of this document is carried out at intervals not exceeding 3 years.

1. General Provisions

1.1. The position "Chief Instrument Operator" belongs to the "Managers" category.

1.2. Qualification requirements - complete higher education in the relevant field of study (master, specialist). Work experience in the professions of lower-level managers in the relevant professional field: for a master's degree - at least 2 years, for a specialist - at least 3 years.

1.3. Knows and applies in practice:
- decrees, orders, orders, methodological, regulatory and other guidance materials on the operation and repair of instrumentation and automation;
- organization of service for operation and repair of instrumentation and automation at the enterprise;
- technical characteristics, design features, purpose and principles of operation of instrumentation and automation;
- organization and technology of repair work;
- production technology;
- prospects for the technical development of the enterprise;
- advanced domestic and foreign experience in the use, organization of operation and repair of instrumentation and automation;
- economics, organization of production, labor and management;
- basics of labor legislation;
- rules and regulations on labor protection, industrial sanitation and fire protection;
- modern means of computer technology, communications and communications.

1.4. The chief instrument operator is appointed and dismissed by order of the organization (enterprise/institution).

1.5. The chief instrument operator reports directly to _ _ _ _ _ _ _ _ _ _ .

1.6. The chief instrument operator supervises the work of _ _ _ _ _ _ _ _ _ _ .

1.7. During absence, the chief instrument operator is replaced by a person appointed in accordance with the established procedure, who acquires the appropriate rights and is responsible for the proper performance of the duties assigned to him.

2. Characteristics of work, tasks and job responsibilities

2.1. Carries out systematic monitoring of the uninterrupted and technically correct operation of instrumentation and automation equipment, and their maintenance at the required level of accuracy.

2.2. Ensures timely submission of samples of instrumentation and measuring instruments for state inspection, safe operation of process units using automatic interlocks and emergency protection equipment administered by the service.

2.3. Organizes accounting of instrumentation and automation equipment, controls their availability and movement within the enterprise.

2.4. Manages the development of plans for technical inspections, tests and all types of repairs of instrumentation and automation, approves and monitors their timely and high-quality implementation, organizes work on their repair.

2.5. Takes part in studying and identifying the causes of industrial accidents.

2.6. Develops and implements measures to increase reliability in the operation of instrumentation and automation, in connection with failures in their operation, as well as the creation of safe and healthy working conditions during their operation.

2.7. Analyzes the degree of efficiency of instrumentation and automation systems used in the enterprise.

2.8. Develops and organizes the implementation of activities that are aimed at increasing the efficiency of using instrumentation and automation.

2.9. Prepares proposals regarding the use of new, more modern instrumentation and automation in production, the widespread use of control tools and automation of production processes.

2.10. Organizes the development of applications for instrumentation and automation equipment, spare parts and materials necessary for the operation of the service, regulatory materials for the repair of instrumentation, as well as the preparation of technical and reporting documentation.

2.11. Monitors compliance by service employees with labor protection and industrial sanitation requirements.

2.12. Carries out work to improve the organization of work for service workers, develops and implements new progressive methods of operation and repair of instrumentation and automation.

2.13. Organizes the study by service employees of best practices in the operation, repair and testing of instrumentation and automation, modern circuits and structure of control devices, automation and computer technology.

2.14. Carries out work to improve the qualifications of workers in the instrumentation and automation service.

2.15. Manages service employees.

2.16. Knows, understands and applies current regulations relating to his activities.

2.17. Knows and complies with the requirements of regulations on labor protection and environmental protection, complies with the norms, methods and techniques for the safe performance of work.

3. Rights

3.1. The chief instrument technician has the right to take action to prevent and eliminate cases of any violations or inconsistencies.

3.2. The chief instrument operator has the right to receive all social guarantees provided for by law.

3.3. The chief instrument operator has the right to demand assistance in the performance of his duties and the exercise of his rights.

3.4. The chief instrument operator has the right to demand the creation of organizational and technical conditions necessary for the performance of official duties and the provision of the necessary equipment and inventory.

3.5. The chief instrument operator has the right to familiarize himself with draft documents relating to his activities.

3.6. The chief instrument operator has the right to request and receive documents, materials and information necessary to fulfill his job duties and management orders.

3.7. The chief instrument operator has the right to improve his professional qualifications.

3.8. The chief instrument operator has the right to report all violations and inconsistencies identified in the course of his activities and make proposals for their elimination.

3.9. The chief instrument operator has the right to familiarize himself with documents defining the rights and responsibilities of the position held, and criteria for assessing the quality of performance of official duties.

4. Responsibility

4.1. The chief instrument operator is responsible for failure to fulfill or untimely fulfillment of the duties assigned by this job description and (or) failure to use the granted rights.

4.2. The chief instrument operator is responsible for failure to comply with internal labor regulations, labor protection, safety regulations, industrial sanitation and fire protection.

4.3. The chief instrument operator is responsible for the disclosure of information about the organization (enterprise/institution) related to trade secrets.

4.4. The chief instrument operator is responsible for non-fulfillment or improper fulfillment of the requirements of internal regulatory documents of the organization (enterprise/institution) and legal orders of management.

4.5. The chief instrument operator is responsible for offenses committed in the course of his activities, within the limits established by the current administrative, criminal and civil legislation.

4.6. The chief instrument operator is responsible for causing material damage to the organization (enterprise/institution) within the limits established by the current administrative, criminal and civil legislation.

4.7. The chief instrument operator is responsible for the unlawful use of the granted official powers, as well as their use for personal purposes.

Unified Tariff and Qualification Directory of Works and Professions of Workers (UTKS), 2019
Part No. 1 of Issue No. 36 of ETKS
The issue was approved by Resolution of the USSR State Committee on Labor and Social Issues and the All-Union Central Council of Trade Unions of June 7, 1984 N 171/10-109
(as amended by the Resolutions of the State Committee for Labor of the USSR, the Secretariat of the All-Union Central Council of Trade Unions dated 02/03/1988 N 51/3-69, dated 08/14/1990 N 325/15-27, Ministry of Labor of the Russian Federation dated 11/21/1994 N 70, dated 07/31/1995 N 43)

Instrument technician

§ 41. Instrument operator 2nd category

Characteristics of work. Switching on and off manometric thermometers, working pressure gauges, resistance thermometers, draft meters, pressure meters, profile millivoltmeters, ratiometers, flow meters, level meters and other devices of the simplest modifications. Change of cartograms and rolls.

Must know: a schematic diagram of installations and facilities in the serviced area; purpose and operation of devices and equipment of serviced facilities; principles of measuring pressure, flow, level, temperature of water, oil products, etc.; design and purpose of control and automation devices; fundamentals of physics and electrical engineering.

§ 42. Instrument operator 3rd category

Characteristics of work. Checking devices to "0". Transferring regulators from automatic to manual control. Filling lubricators with lubricants for flow, level and actuators. Inspection and elimination of emerging malfunctions in direct-acting regulators, gearboxes and filters.

Must know: elements of automatic regulation of remote control and transmission of readings over a distance; rules for using control devices and testing schemes; methods of testing pyrometric traces and crimping impulse lines; methods for identifying defects in the operation of devices and eliminating them; plumbing; basics of electronics.

§ 43. Instrument operator 4th category

Characteristics of work. Adjustment and process adjustment of all control systems at process installations, in pump and compressor departments, and pipelines. Adjustment of instrument readings under operating conditions. Preparing instruments for testing. Checking readings with control devices and troubleshooting devices for measuring level, flow, pressure, temperature.

Must know: the procedure for calculating and introducing amendments to instrument readings; procedure for calculating replacement glasses; rules for installing devices; alarm and blocking schemes in the serviced area; devices of the aggregate-unified system; installation of quality devices of all systems and their maintenance; the procedure for repairing devices with replacing individual components and adjusting them during the process.

§ 44. Instrument operator 5th category

Characteristics of work. Maintenance and adjustment of automation equipment mounted on serviced installations. Development and implementation of new means of control and automatic regulation. Production in laboratory conditions of analysis to determine the dielectric loss tangent of petroleum products. Monitoring the periodic checking of devices and submitting them for state verification. Drawing up defect sheets for current and major repairs. Receiving completed repair work and checking the readiness of devices for startup. Supervising the work of instrument technicians of lower qualifications.

Must know: design, repair methods, testing and adjustment of maintenance of control and automation devices; the main processes of processing oil, gas, and other products used at this enterprise; methods for calculating restriction devices, control valves, replaceable vessels; radio basics.

§ 45. Instrument operator 6th category

Characteristics of work. Maintenance of control panels of integrated installations and telemechanics devices. Switching on and setting up automatic quality and composition regulators. Setting up cascade control circuits, including those with composition analyzers. Monitoring the implementation of the schedule for periodic inspection of instruments and automation equipment. Guidance of less qualified instrument technicians in setting up and repairing devices of aggregate-unified systems, automatic quality analyzers, cascade control systems. Maintaining technical documentation for the operation of devices. Participation in the commissioning of technological installations.

Must know: technological schemes of installation at the serviced site; requirements of state standards for the quality of petroleum products in installations with automatic quality analyzers; installation of telemechanics equipment, its adjustment and adjustment; equipment of communication channels used for telemetering and telecontrol; main oil refining processes at the enterprise; methods for calculating instruments and actuators and setting up interconnected control schemes; basics of radio engineering, telemechanics.

Secondary specialized education required.

§ 45a. Instrument operator 7th category

Characteristics of work. Maintenance of control panels of technological complexes and software-controlled installations equipped with video control systems. Adjustment and regulation of electronic devices of any type, individual components, electronic circuits of microprocessor technology and video control systems. Diagnostics, testing of individual components and electronic circuits, identifying problems and eliminating distortions in the information support system. Carrying out repair and restoration work on elements of electrical and electronic control circuits, troubleshooting equipment. Repair of sensors of unique control systems. Drawing up defective statements for repair work. Participation in the installation and development of new electronic and video systems.

Must know: technological diagrams of serviced complexes and installations; principles of operation of a technological complex with program control; methods and methods of programming and servicing processor devices and video systems; methods for setting up individual components and circuits.

Secondary vocational education required.

§ 42b. Instrument operator 8th category

(introduced by Decree of the Ministry of Labor of the Russian Federation dated July 31, 1995 N 43)

Characteristics of work. Maintenance and comprehensive adjustment of microprocessor technology, functional electronic units (with complex hydraulic, vacuum, kinematic and radio-electronic circuits), distribution control systems (DCS) and video control systems of complex technological complexes and installations for the processing of oil, petroleum products, shale, gas and coal. Adjustment and repair of computer systems of technological complex and installations. Diagnostics, checking the interaction of various blocks and systems, identifying and eliminating malfunctions in the operation of equipment and defects in the information support system. Monitoring the rhythmic operation of all components and assemblies of the technological complex and installations and software for monitoring process parameters. Analysis and systematization of failures and damage to electronic and video systems and development of measures to improve the reliability of their operation. Monitoring the operation of electronic systems using a programmable machine. Management of lower skilled workers. Maintaining technical documentation on the operation of electronic equipment and video systems. Participation in the commissioning of complex technological complexes and installations.

Must know: complex systems for automatic measurement and regulation of technological processes using distribution control systems (DCS), video control systems and microprocessor technology; fundamentals of the theory of automatic control and modern electronic technology; ways and methods of adjusting technological and test programs; calculation methods related to the selection of optimal operating modes of equipment, replacement of elements of electrical, radio and telemechanics circuits; technological process and principles of operation of technological complexes and installations.

Secondary vocational education is required."

ECSD 2018. Revision dated April 9, 2018 (including those with changes that entered into force on July 1, 2018)
To search for approved professional standards of the Ministry of Labor of the Russian Federation, use directory of professional standards

Shop instrument technician

Job responsibilities. Ensures the operation of measuring, testing, control and automation instruments, automated control systems (ACS), their correct operation, timely repair and modernization. Organizes the drawing up of schedules for preventive maintenance, state and departmental verification of measures and measuring instruments. Studies the operating conditions of equipment, analyzes cases of failure of devices and automation circuits. Develops and implements progressive methods of repair and restoration of components and parts, as well as measures to increase the service life of equipment, reduce its downtime, prevent accidents and industrial injuries, reduce the labor intensity and cost of repairs, and improve its quality. Monitors the expenditure of funds necessary for repairs, the preparation of applications for devices, spare parts, materials, tools and the maintenance of accounting and reporting documentation on their expenditure. Participates in the investigation of the causes of violation of technological conditions, defects, unproductive consumption of raw materials, materials, energy related to the condition of equipment. Considers rationalization proposals and inventions and gives conclusions on them. Monitors employees' compliance with labor and environmental protection and fire safety rules. Supervises employees performing overhaul maintenance of process control devices and automation systems.

Must know: laws and other regulatory legal acts of the Russian Federation, methodological and regulatory documents on the organization of maintenance, scheduled maintenance and metrological control of measuring instruments, testing, control and automation, automated control systems, technical characteristics, design features, purpose, rules of technical operation and operating modes instrument equipment of the workshop, technology for repair work, the procedure for drawing up the necessary technical documentation, rules for the acceptance and delivery of equipment after repair, the basics of the production technology of products manufactured by the workshop, prospects for the technical development of the workshop, the basics of economics, the organization of production, labor and management, the basics of labor legislation, rules for environmental protection, labor protection and fire safety rules, internal labor regulations.

Qualification requirements. Higher professional (technical) education and work experience in specialist positions for at least 3 years.

Vacancies for the position of Shop Instrument Operator according to the all-Russian vacancy database

JOB DESCRIPTION

instrument operator 6th category

1. General Provisions

1.1. This job description defines the functional, job responsibilities, rights and responsibilities of the 6th category instrument operator of the “Complex Technologies” division (hereinafter referred to as the 6th category instrument operator) of the All-Russian Association of Employers “Russian Union of Industrialists and Entrepreneurs” (hereinafter referred to as the Institution).

1.2. A person who meets the following education and training requirements is appointed to the position of 6th category instrument operator:

with practical work experience:

Special conditions for permission to work as an instrument operator of the 6th category:

1.3. A 6th grade instrument technician must know:

1.4. A 6th grade instrument technician must be able to:

1.5. An instrument operator of the 6th category is appointed to the position and dismissed from the position by order of the managing director of the Qualifications Development Department of the Institution in accordance with the current legislation of the Russian Federation.

1.6. Instrumentationist of the 6th category reports to the Managing Director of the Qualifications Development Department of the Institution and the head of the “Complex Technologies” division

2. Labor functions

3. Job responsibilities

4. Rights

An instrument technician of the 6th category has the right to:

4.1. Request and receive the necessary information, as well as materials and documents related to the activities of a 6th category instrument operator.

4.2. Improve your qualifications, undergo retraining (retraining).

4.3. Enter into relationships with departments of third-party institutions and organizations to resolve issues within the competence of a 6th category instrument operator.

4.4. Take part in the discussion of issues included in his functional responsibilities.

4.5. Make suggestions and comments on how to improve activities in the assigned area of ​​work.

4.6. Contact the relevant local government bodies or the court to resolve disputes arising during the performance of functional duties.

4.7. Use information materials and regulatory documents necessary to perform your job duties.

4.8. Pass certification in the prescribed manner.

5. Responsibility

An instrument technician of the 6th category is responsible for:

5.1. Failure to perform (improper performance) of one’s functional duties.

5.2. Failure to comply with orders and instructions from the Managing Director of the Qualifications Development Department of the Institution.

5.3. Inaccurate information about the status of fulfillment of assigned tasks and instructions, violation of deadlines for their execution.

5.4. Violation of internal labor regulations, fire safety and safety rules established in the Institution.

5.5. Causing material damage within the limits established by the current legislation of the Russian Federation.

5.6. Disclosure of information that has become known in connection with the performance of official duties.

For the above violations, an instrument operator of the 6th category may be subject to disciplinary, material, administrative, civil and criminal liability in accordance with current legislation, depending on the severity of the offense.

This job description has been developed in accordance with the provisions (requirements) of the Labor Code of the Russian Federation dated December 30, 2001 No. 197 FZ (Labor Code of the Russian Federation) (with amendments and additions), the professional standard “Oil and Gas Industry Operator” approved by order of the Ministry of Labor and Social Protection of the Russian Federation Federation of April 19, 2017 No. 368n and other regulations governing labor relations.